1/20/2023 0 Comments Hks evc v boost controller manual![]() ![]() The percentage by which the offset value is reduced when the warning value is exceeded. Set, for example, to 125kPa (1.25bar) in Setup A and 150kPa (1.5bar) in Setup BĠ-100%. When the warning value is reached, the parameter "Off Set Value" is reduced by the value "Drop Value". warning threshold at which the warning buzzer becomes active and the boost pressure is reduced. is the value from which boost pressure control becomes active.Ġ-250kPA or 0-36PSI. The HKS EVC enables the adjustment of the boost setting from inside the vehicle. the higher the value, the faster the boost pressure is built up but the greater the danger that the regulation overshoots (boost pressure peaks).Ġ-250kPA or 0-36PSI. HKS FCD, a fuel controller may be required for additional fuel tuning. Starts at 30-40% and then increases step by step according to the desired boost pressureĠ-100%. So that's the duty cycle of the wastegate. the higher the value, the higher the boost pressure. There are 5 different parameters that must be set for the two storable setups A and B.Ġ-100%. Port 2 (I) - Connect to a source of pressurized air such as a turbocharger compressor housing (discharge side) or compressor outlet pipe (before the intercooler) using the 6mm hose. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |